Siemens Sirius 3RA6 System Manual Download Page 25

Page: 25 / 320

SIRIUS 3RA6 compact starter
System Manual, 09/2014, NEB560060102000/RS-AA/006

Application planning

4.1

General data

Mounting position

The module can be installed vertically (that is, on a horizontally installed standard mounting

rail) or horizontally (that is, on a vertically installed rail).

Operating conditions

SIRIUS 3RA6 compact starters are suitable for use in any climate. They are intended for use

in enclosed rooms in which no severe operating conditions (such as dust, caustic vapors,

hazardous gases) prevail. Suitable covers must be provided for installation in dusty and

damp locations.

Cabinet types

The system can be installed inside a central control cabinet or a distributed control box.

Grounding measures

No grounding measures are necessary.

Operating temperature

The compact starter has been designed for use under ambient temperatures ranging from

- 20 °C to + 40 °C without a reduction in the permissible operating current.

Summary of Contents for Sirius 3RA6

































































































































































































































































































































Search results

Summary of Contents for Sirius 3RA6

Reviews:

Related manuals for Sirius 3RA6

Brands by name

Popular brands

Siemens Sirius 3RA6, System Manual

Search results

Summary of Contents for Sirius 3RA6

Reviews:

Related manuals for Sirius 3RA6

Brands by name

Popular brands