Siemens Sirius 3RA6 System Manual Download Page 166

Page: 166 / 320

Accessories

7.7 Infeed system for 3RA6

SIRIUS 3RA6 compact starter

166

System Manual, 09/2014, NEB560060102000/RS-AA/006

Step

Instructions

Image

Remove the end cover.

Snap the extension module onto the

standard mounting rail until you hear it

engage.

Push together the extension module

and the module that has already been

installed.

Use the 3 link wedges to establish a

mechanical connection between the 2

modules.

Use an extension connector to establish

an electrical connection between the 2

modules.

Attach the end cover to the additional

extension module.

Note
If the infeed system is being mounted on a vertical mounting rail, a suitable stopper must be

installed underneath the infeed system to keep it in place.

Summary of Contents for Sirius 3RA6

































































































































































































































































































































Search results

Summary of Contents for Sirius 3RA6

Reviews:

Related manuals for Sirius 3RA6

Brands by name

Popular brands

Siemens Sirius 3RA6, System Manual

Search results

Summary of Contents for Sirius 3RA6

Reviews:

Related manuals for Sirius 3RA6

Brands by name

Popular brands