Engineer Management
87
Siemens Building Technologies
Fire Safety & Security Products
07.2009
19
Engineer Management
The following sections describe the engineer menu when it’s accessed by control
unit keypad instead of Sylcom.
The additional functions which are only accessible via keypad (e.g addressing of
devices, test functions) are also described.
PIN Authorizations
NOTE
If a PIN is lost the engineer must recreated in the system.
Change Engineer Name
The current engineer name can be replaced by a freely definable name (maximum of 16 characters). Each
engineer must have his own unique name in order to be clearly identified.
1: Change PIN
The engineer can change his own PIN.
2: PINs Management
The engineer can create new engineers/users/visitors and change their authorizations. Engi-
neers/users/visitors can also be deleted.
The "
Invert output
" function can be assigned from the users/visitors only from the engineer menu.
The keyboard authorizations can also be assigned to the radio remote keypads.
3: Log Books
The engineer has access to the complete system log books.
4: Engineer Reset
The engineer has access to the engineer reset.
5: System Programming
The engineer has access to all system options.
6: Telecom Options
The engineer has access to all communications options.
7: Time Option
The engineer has access to all time functions.
8: Test Functions
The engineer has access to all test functions.
9: Addressing Options
The engineer has access to all addressing options.
19.1 Change
personal
PIN
Enter a new PIN and confirm with (enter) or cancel with (X)
19.2 PINs Management
19.2.1 Create Engineer PIN
[TM212] New PIN
New engineer PIN can be created here. To do this, an engineer is always used as a reference.
Reference
(copy source)
The engineer whose parameters are to be used as reference for the new engineer can be chosen here. The engi-
neer number of the new user is shown at the end with the PIN provided by the system.
If an unused user number is used as a reference, the engineer number of the reference is assigned to the new
user, otherwise the system automatically assigns the next free engineer number.
Engineer Name
Any freely-definable name can be entered as the engineer name (maximum 16 characters).
This name should be unique because otherwise several engineers with the same name may appear in the log
book.
Provisional PIN
The system assigns a provisional 6-digit PIN. This gives the engineer the authorization to change this PIN when
used the first time. Thereafter, he has to leave the menu to update the authorizations programmed for this PIN.
After this, only the engineer knows his PIN. On printout the PIN is not shown, but instead the text "User PIN".
Secret PIN
This PIN can also be designated as a secret PIN, because it is never displayed again.
Final PIN
If the PIN assigned from the system is changed during creation, a final PIN is created. This PIN can be used by the
engineer without limitation. It is always printed in the printout with the PIN, even if this has been changed by the
engineer.
Summary of Contents for SI120
Page 99: ......
