Siemens SI120 Configuration Manual Download Page 9 | Manualshive

Page: 9 / 100

background image

Safety

9

Siemens Building Technologies

Fire Safety & Security Products

07.2009

1 Safety

1.1 Target

readers

Target readers

Qualification

Activity

Condition of the
product

Operational startup
personnel

Technical training for
electrical installations.
Training on the product
is necessary.

Puts the product into opera-
tion for the first time, or
changes the existing con-
figuration.

The product is installed
but not yet configured,
or the existing configu-
ration is to be changed.

Service personnel

Technical training for
electrical installations.

Checks the product at regu-
lar intervals to ensure that it
is in good working order,
services the device or sys-
tem and repairs it or ex-
pands and upgrades the
system.

Product already in use
and requiring servicing.

1.2

Work safety information

z

Read the safety precautions in the attached flyer before installing the device.

z

Keep this document for reference.

z

Always pass this document on together with the product.

z

Please also take into account any additional country-specific, local laws, safety
standards or regulations concerning installation, operation and disposal of the
product.

Radio interference with other devices in the environment / EMC

z

This is a Class A device. This equipment may cause radio interference in a resi-
dential installation. In this case the user is encouraged to perform appropriate
measures to correct the interference.

z

The unit operates on frequencies that are approved for use in the European Un-
ion. When used outside the EU, the national regulations for the use of frequen-
cies must be observed.

Damage due to unsuitable mounting location

z

The environmental conditions recommended by the manufacturer must be ob-
served.

z

Do not operate the device close to sources of powerful electromagnetic radia-
tion.

z

Do not operate the device in dusty places.

z

The device should only be used for indoor applications.

z

Do not expose the device to mechanical vibrations or shocks.

z

Protect the device against moisture.

Dangerous situation due to false alarm

z

Make sure to notify all relevant parties and authorities providing assistance be-
fore testing the system.

z

To avoid panic, always inform all those present before testing any alarm devices

«
...
7
8
9
10
11
...
»

Summary of Contents for SI120





































































































Reviews:

No comments

Related manuals for SI120

Brand: Lawler Pages: 4

Brand: 7bit Pages: 2

Brand: Jafar Pages: 15

Brand: Fantech Pages: 2

Brand: ValvTechnologies Pages: 20

Clip Studio TABMATE

Brand: CELSYS Pages: 2

MIMIC HRNDWHEELS

Brand: MRMC Pages: 20

Brand: McIntosh Pages: 60

Brand: Ruida Technology Pages: 45

Brand: ICP DAS USA Pages: 4

InRAX MVI46-PDPS

Brand: ProSoft Technology Pages: 72

Brand: FMS Pages: 108

Brand: VAT Pages: 94

Char-Lynn 5 Series

Brand: Eaton Pages: 12

NI 9503 C Series

Brand: National Instruments Pages: 18

Brand: INAZUMA Pages: 16

Brand: RCNTEC Pages: 337

Brand: M-system Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands