Sharp MX-2615N Operation Manual Download Page 96

Page: 96 / 836

1-55

BEFORE USING THE MACHINE

Contents

Mount the waste toner box.

Insert it in a direction slanting from the top towards the bottom.
(A direction opposite to that at the time of mounting it.)

Push the waste toner box in till the
innermost point.

Push it in until it clicks into place.

Lock the waste toner box.

Move the lock of the waste toner box to the lock position.

Close the front cover.

Summary of Contents for MX-2615N





































































































































































































































































































































































































































































































































































































































































































































































































































































Sharp MX-2615N, Operation Manual, Page: 96 / 836

Search results

Summary of Contents for MX-2615N

Reviews: