Sharp MX-2615N Operation Manual Download Page 800

Page: 800 / 836

8-12

TROUBLESHOOTING

Contents

Lower the lever at the front end of the
staple case.

Replace the staple case.

Push the staple case in until it clicks into place.

Slide the finisher back to the right.

Gently slide the finisher back to the right until it locks into its
original position.

Close the cover.

Summary of Contents for MX-2615N





































































































































































































































































































































































































































































































































































































































































































































































































































































Sharp MX-2615N, Operation Manual, Page: 800 / 836

Search results

Summary of Contents for MX-2615N

Reviews: