manualshive.com logo in svg

Sharp MX-2615N, Operation Manual, Page: 128 / 836

Share
Download
Sharp MX-2615N Operation Manual Download Page 128

2-19

COPIER

Contents

3

Select the 2-sided copy mode.

(1) Touch the [1-Sided to 2-Sided] key.

(2) Touch the [OK] key.

The [2-Sided to 2-Sided] key and [2-Sided to 1-Sided] key cannot be used when copying from the document glass.

4

Check the paper to be used and the 
colour mode.

Make sure that the desired paper (tray) and colour mode are 
selected.

• To change the paper (tray), touch the [Paper Select] key.

☞

PAPER TRAYS

 (page 2-11)

• To change the colour mode, touch the [Colour Mode] key.

☞

COPY COLOUR MODES

 (page 2-21)

Depending on the size of the placed original, there may be cases where the same size of paper as the original is not 
selected automatically. In this event, change the paper size manually.

5

Set the number of copies (number of 
sets) with the numeric keys.

• Up to 999 copies (sets) can be set.

• A single copy can be made even if "0" appears for the number of copies.

If an incorrect number of copies is set...

Press the [CLEAR] key (

) and then enter the correct number.

6

Press the [COLOUR START] key or the [BLACK & WHITE START] key.

Scanning begins.

7

Remove the original and place the next original, and then press the [COLOUR 
START] key or the [BLACK & WHITE START] key.

Repeat this step until all originals have been scanned.
For the second original and following originals, use the same [START] key as you did for the first original.

OK

2-Sided Copy

Binding

Change

(1)

(2)

Colour Mode

Special Modes

2-Sided Copy

Output

File

Quick File

Copy Ratio

100%

Original

Paper Select

Auto

A4

Plain

Auto

Full Colour

Exposure

Auto

A4

Preview

Plain

A3

3.

1.

2.

A4

A4R

B4

4.

A4

Plain

7

A4

Special Modes

2-Sided Copy

Summary of Contents for MX-2615N





































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments