manualshive.com logo in svg

Sharp MX-2615N, Operation Manual, Page: 71 / 836

Share
Download
Sharp MX-2615N Operation Manual Download Page 71

1-30

BEFORE USING THE MACHINE

Contents

TRAY SETTINGS FOR TRAY 1 TO 4

LOADING PAPER AND CHANGING THE PAPER SIZE

A maximum of 500 sheets of paper from size A5R to A3 (5-1/2" x 8-1/2"R to 11" x 17") can be loaded in trays 1 to 4.

1

Pull out the paper tray.

Gently pull the tray out until it stops.
To load paper, go to step 3. To load a different size of paper, go 
to the next step.

2

Adjust the guide plates A and B by 
squeezing their lock levers and sliding 
them to match the vertical and 
horizontal dimensions of the paper to be 
loaded.

The guide plates A and B are slidable. Slide each guide plate 
while squeezing its lock lever.

3

Fan the paper.

Fan the paper well before loading it. If the paper is not fanned, 
multiple sheets may feed at once and cause a misfeed.

4

Insert the paper into the tray.

Load the paper with the print side face up. The stack must not 
be higher than the indicator line (maximum of 500 sheets).

A

B

Indicator 
line

Summary of Contents for MX-2615N





































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments