Sharp MX-2615N Operation Manual Download Page 549

Page: 549 / 836

5-66

SCANNER/INTERNET FAX

Contents

To change the number of pages per file,
enter the number of pages and exit the
format settings.

(1) Touch the [Specified Pages per File]

checkbox so that a checkmark

appears.

(2) Set the number of pages per file with the

keys.

(3) Touch the [OK] key.

• When a checkmark does not appear in the [Specified Pages per File] checkbox

, one file is created for all

scanned pages.

• When [Specified Pages per File] is selected, consecutive numbers are added to the created file names.

• When [JPEG] is selected for the file type, one file is created for each page (a file cannot be created for multiple

pages). For this reason, the [Specified Pages per File] checkbox does not appear.

• When the file format is set to Encrypt PDF, a screen prompting you to enter a password will appear when the [START] key

is pressed to start scan send transmission.

• Touch the [Entry] key in the displayed screen to open the keyboard screen. Enter a password (maximum of 32 characters)

and touch the [OK] key. Scanning and transmission will begin.

System Settings (Administrator): Initial File Format Setting

This sets the default file format setting for scanner transmission.

B/W

Colour/Grey

Scan/File Format

Specified Pages per File

File Type

(1-99)

Compression Ratio

Low

High

Medium

PDF

XPS

TIFF

Programmed

JPEG

PDF/A

Encrypt PDF

(3)

(1)

(2)

Summary of Contents for MX-2615N





































































































































































































































































































































































































































































































































































































































































































































































































































































Sharp MX-2615N, Operation Manual, Page: 549 / 836

Search results

Summary of Contents for MX-2615N

Reviews: