Sharp MX-2615N, Operation Manual, Page: 704 / 836

7-36
SYSTEM SETTINGS
Contents
Network Settings
*1 Depending on your machine specifications, only the items under "General Setting" will be displayed.
*2 This cannot be set on the machine. Set this in the system settings in the Web pages.
X
Disabling Deletion of Job Programs Disabled 7-74
X
Disabling of Bypass-Tray in Duplex Copy Disabled 7-74
X
Disabling of Auto Paper Selection Disabled 7-74
X
Auto Selection Setting of Tray that is Supplied the Paper Disabled 7-74
X
B/W 600dpi x 600dpi Scanning Mode for Document Feeder Disabled 7-74
X
B/W Quick Scan from Document Glass Enabled 7-74
●
Colour Adjustments 7-75
X
Initial Colour Balance Setting Factory default state 7-75
X
Auto Colour Calibration – 7-75
Item Factory default setting Page
■
Network Settings
7-76
●
General Setting *
1
7-76
X
IPv4 Settings DHCP 7-76
X
IPv6 Settings Disabled 7-76
X
Enable TCP/IP Enabled 7-76
X
Enable NetWare Disabled 7-76
X
Enable EtherTalk Disabled 7-76
X
Enable NetBEUI Disabled 7-76
X
Reset the NIC – 7-76
X
Ping Command – 7-76
●
Connection Type Switching *
1
7-77
●
Wireless Settings *
1
7-77
●
NAS Setting *
2
7-77
Item Factory default setting Page