manualshive.com logo in svg

Sharp MX-2615N, Operation Manual, Page: 164 / 836

Share
Download
Sharp MX-2615N Operation Manual Download Page 164

2-55

COPIER

Contents

Changing the copy settings for each set of originals

The copy settings (Exposure, Paper Select, and Copy Ratio only) can be changed for each set of originals.
Perform the step below before pressing the [Start] key to scan the originals in step 4 above.

1

Touch the [Change] key.

2

Change the desired copy settings in the 
screen that appears and press the [Start] 
key.

Scanning of the originals will begin using the changed copy 
settings.
To cancel the copy setting changes and begin copying without 
scanning the new originals, touch the [Read-End] key.

• The colour mode cannot be changed with the [Colour Mode] key.

• The original size cannot be changed manually with the [Original] key. If the automatic original detection function is 

operating, the original size will be detected for each set of originals placed.

• When the bypass tray is selected, it is not possible to change the paper type.

• If "XY Zoom" was set for the ratio when the previous original was scanned, it will not be possible to change the ratio.

• When "Job Build" is used in combination with the functions below, the [Change] key will not appear in the screen of step 1 

above.

 

Pamphlet copy, tandem copy, covers/inserts, transparency inserts, multi-shot, book copy, tab copy, staple sort

Read-End

Change

Place next original and press [Start].

to change copy settings,

press [Change].

Auto

A4

Plain

A4

Colour Mode

Read-End

Copy Ratio

100%

Original

Paper Select

Auto

Full Colour

Exposure

Auto

Plain

A3

3.

1.

2.

A4

A4R

B4

4.

A4

Summary of Contents for MX-2615N





































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments