manualshive.com logo in svg

Sharp MX-2615N, Operation Manual, Page: 224 / 836

Share
Download
Sharp MX-2615N Operation Manual Download Page 224

2-115

COPIER

Contents

REVERSING WHITE AND BLACK IN A COPY (B/W Reverse)

This is used to reverse black and white in a copy to create a negative image. This function can only be used for black 
and white copying.
Originals with large black areas (which use a large amount of toner) can be copied using Black/White Reverse to reduce 
toner consumption.

1

Place the original.

Place the original face up in the document feeder tray, or face down on the document glass.

2

Select the special modes.

(1) Touch the [Special Modes] key.

(2) Touch the 

 keys to switch through the screens.

(3) Touch the [Image Edit] key.

☞

[Image Edit] KEY

 (page 2-104)

3

Select B/W Reverse.

(1) Touch the [B/W Reverse] key so that it is 

highlighted.

(2) Touch the [OK] key.

You will return to the special modes screen. Touch the 
[OK] key to return to the base screen of copy mode.

4

Press the [BLACK & WHITE START] key.

Copying will begin.
If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you 
have selected sort mode, change originals and press the [BLACK & WHITE START] key. Repeat until all pages have been 
scanned and then touch the [Read-End] key.

When using this function, the [COLOUR START] key cannot be used.

To cancel scanning and copying...

Press the [STOP] key (

).

Originals

B/W Reverse copy

A3

Full Bleed

OK

Mirror

Image

B/W

Reverse

Multi-Page

Enlargement

Centring

Photo Repeat

Special Modes

Image Edit

OK

(1)

(2)

Summary of Contents for MX-2615N





































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments