manualshive.com logo in svg

Sharp MX-2615N, Operation Manual, Page: 154 / 836

Share
Download
Sharp MX-2615N Operation Manual Download Page 154

2-45

COPIER

Contents

4

Press the [COLOUR START] key or the [BLACK & WHITE START] key.

Copying will begin.
If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you 
have selected sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and then 
touch the [Read-End] key. (For the second original and following originals, use the same [START] key as you did for the first 
original.)

To cancel scanning of the original and copying...

Press the [STOP] key (

).

Rotation copy cannot be used in combination with margin shift.

To cancel the margin shift setting...

Touch the [Cancel] key in the screen of step 3.

System Settings (Administrator): Initial Margin Shift Setting

The default margin shift setting can be set from 0 mm to 20 mm (0" to 1"). The factory default setting is 10 mm (1/2").

Summary of Contents for MX-2615N





































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments