manualshive.com logo in svg

Sharp MX-2615N, Operation Manual, Page: 104 / 836

Share
Download
Sharp MX-2615N Operation Manual Download Page 104

1-63

BEFORE USING THE MACHINE

Contents

5

Push the cartridge in until it locks 
securely in place.

Push the cartridge firmly in until it clicks into place.

6

Close the front cover.

After the toner cartridge is replaced, the machine automatically 
enters image adjustment mode.

Caution

•

Do not throw a toner cartridge into a fire. Toner may fly and cause burns.

•

Store toner cartridges out of the reach of small children.

•

If a toner cartridge is stored on end, the toner may harden and become unusable. Always store toner cartridges on their 
side.

•

If a toner cartridge other than a SHARP-recommended toner cartridge is used, the machine may not attain full quality 
and performance and there is a risk of damage to the machine. Be sure to use a SHARP-recommended toner cartridge.

• Keep the used toner cartridge in a plastic bag (do not discard it). Your service technician will collect the used toner 

cartridge.

• To view the approximate amount of toner remaining, continually touch the [COPY] key during printing or when the machine 

is idle. The percentage of toner remaining will appear in the display while the key is touched. When the percentage falls to 
"25-0%", obtain a new toner cartridge and keep it ready for replacement.

• Depending on your conditions of use, the colour may become faint or the image blurred.

Summary of Contents for MX-2615N





































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments