manualshive.com logo in svg

Sharp MX-2615N, Operation Manual, Page: 397 / 836

Share
Download
Sharp MX-2615N Operation Manual Download Page 397

4-53

FACSIMILE

Contents

Specifying the send size of the original

Specify the send size as a paper size. If a send size bigger than the scan size is selected, the image will be enlarged. If 
a send size smaller than the scan size is selected, the image will be reduced.

The send size cannot be specified when [Long Size] is selected for the scan size, or when the scan size is specified by 
numerical values.

1

Touch the [Original] key.

☞

IMAGE SETTINGS

 (page 4-46)

2

Touch the [Send Size] key.

3

Specify the send size.

(1) Touch the desired send size key.

(2) Touch the [OK] key.

• Depending on the "Scan Size" setting, it may not be possible to select some sizes for the "Send Size". Size keys 

that cannot be specified for the "Send Size" are greyed out to prevent selection.

• To specify an Inch size for the send size, touch the [AB

Inch] key to highlight the [Inch] side and then specify the 

send size.

Auto

Auto    A4

Scan Size

Send Size

100%

Fax/Original

OK

2-Sided
Booklet

2-Sided
Tablet

Image Orientation

Auto

Fax/Original

Manual

OK

A3

Manual

B5R

B4

A4

A5R

B5

216x343

216x340

A4R

A5

AB

Inch

(2)

(1)

Summary of Contents for MX-2615N





































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments