manualshive.com logo in svg

Sharp MX-2615N, Operation Manual, Page: 102 / 836

Share
Download
Sharp MX-2615N Operation Manual Download Page 102

1-61

BEFORE USING THE MACHINE

Contents

REPLACING THE TONER CARTRIDGES

Be sure to replace the toner cartridge when the message "Change the toner cartridge." appears.

In copy mode

• If any one of the toner colours runs out (including black toner), colour printing will not be possible. If Y, M, or C toner runs 

out but Bk toner remains, black and white printing will still be possible.

• Be sure to install 4 toner cartridges (Y/M/C/Bk).

OK

Change the toner cartridge.

(       )

Ready to scan for copy.
(        )

OK

Change the toner cartridge.

(       )

Ready to scan for copy.
(        )

Colours that are running low or have run out of toner are indicated in (

).

: Yellow toner, 

: Magenta toner, 

: Cyan toner, 

: Black toner

Replace the toner cartridges of the indicated colours.

Y

M

C

Bk

If you continue to use the machine without replacing 
the cartridge, the following message will appear 
when the toner runs out.

Summary of Contents for MX-2615N





































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments