manualshive.com logo in svg

Sharp MX-2615N, Operation Manual, Page: 558 / 836

Share
Download
Sharp MX-2615N Operation Manual Download Page 558

5-75

SCANNER/INTERNET FAX

Contents

ERASING PERIPHERAL SHADOWS ON THE 
IMAGE (Erase)

The erase function is used to erase shadows on images produced when scanning thick originals or books. (This function erases 
the parts of the image where shadows tend to form. The function does not detect shadows and erase only the shadows.)

Scanning a thick book

Erase modes

Shadows appear here

Not using the erase 

function

Using the erase 

function

Shadows appear in the 
image.

No shadows appear.

• Shadows at the edges of the original can also be erased when the automatic document feeder is used.

• When using USB memory mode, connect the USB memory device to the machine before performing the procedure below.

1

Place the original.

Place the original face up in the document feeder tray, or face down on the document glass.

2

Specify the destination.

☞

ENTERING DESTINATIONS

 (page 5-18)

When scanning to USB memory, there is no need to specify the destination. Go to step 3.

3

Select the special modes.

(1) Touch the tab of the mode that you wish to use.

(2) Touch the [Special Modes] key.

(3) Touch the [Erase] key.

☞

SPECIAL MODES

 (page 5-71)

Edge Erase

Centre Erase

Edge + Centre Erase

Side Erase

Summary of Contents for MX-2615N





































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments