manualshive.com logo in svg

Sharp MX-2615N, Operation Manual, Page: 189 / 836

Share
Download
Sharp MX-2615N Operation Manual Download Page 189

2-80

COPIER

Contents

4

Load the tab paper.

When using the bypass tray, place the paper with the print side 
down.

 

Place the paper so that the sides with the tabs enter the 
machine last. 

 

After loading the tab paper, configure the bypass tray settings 
as explained in "

MAKING COPIES USING THE BYPASS 

TRAY

" (page 2-38).

The width of the tab paper can be as wide as A4 width (210 mm) plus 20 mm (or 8-1/2" x 11" paper (8-1/2") plus 5/8").

5

Press the [COLOUR START] key or the [BLACK & WHITE START] key.

Copying will begin.
If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you 
have selected sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and then 
touch the [Read-End] key. (For the second original and following originals, use the same [START] key as you did for the first 
original.)

To cancel scanning and copying...

Press the [STOP] key (

).

To cancel tab copy...

Touch the [Cancel] key in the screen of step 3.

System Settings (Administrator): Initial Tab Copy Setting

The default image shift width can be set from 0 mm to 20 mm (0" to 5/8"). The factory default setting is "10 mm (1/2")".

Reverse side

Summary of Contents for MX-2615N





































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments