manualshive.com logo in svg

Sharp AR M162 - B/W Laser - All-in-One, Operation Manual, Page: 58 / 372

Share
Download
Sharp AR M162 - B/W Laser - All-in-One Operation Manual Download Page 58

56

TWO-SIDED COPYING

TWO-SIDED COPYING

The machine is capable of the following types of automatic two-sided copying. The copy paper is turned over 
automatically, allowing two-sided copying to be accomplished with ease.

*1 The optional single pass feeder (AR-SP6N) or reversing single pass feeder (AR-RP6N) is required.
*2 The optional reversing single pass feeder (AR-RP6N) is required.

Model

Two-sided copy type

AR-M162

AR-M207

Page

One-sided originals to two-sided 
copies (using the SPF)

No

Yes*

1

57

One-sided originals to two-sided 
copies (using the document glass)

No

Yes

58

Two-sided originals to two-sided 
copies (using the RSPF)

No

Yes*

2

59

Two-sided originals to one-sided 
copies (using the RSPF)

No

Yes*

2

60

• If you are using the AR-M162, see "TWO-SIDED COPIES USING THE BYPASS TRAY" on page 61.
• There are restrictions on the paper that can be used for automatic two-sided copying. See "Paper that can be 

used for automatic 2-sided printing" on page 18.

• Automatic two-sided copying is not possible when the bypass tray is used.

Note

Summary of Contents for AR M162 - B/W Laser - All-in-One





















































































































































































































































































































































































Reviews:

No comments