manualshive.com logo in svg

Sharp AR M162 - B/W Laser - All-in-One, Operation Manual, Page: 307 / 372

Share
Download
Sharp AR M162 - B/W Laser - All-in-One Operation Manual Download Page 307

23

WEB FUNCTIONS OF THE MACHINE

4

PRINTER DEFAULT SETTINGS

Configure basic printer settings and printer language settings. The printer default settings consist of the following 
three screens.

•

Default settings (page 24)

: Basic settings that are mainly used when the printer driver is not used (for example, 

when printing from a DOS application).

•

PCL settings (page 24)

: PCL symbol set, font, line feed code, and other settings.

•

PostScript settings (page 24)

*:Sets whether or not a PostScript error page is printed when a PostScript error 

occurs.

* This setting only appears when the PS3 expansion kit is installed.

Configuring the printer condition settings

1

Click [Condition Settings] in the menu 
frame. 

The "Default Settings" 
screen of the [Condition 
Settings] appears. If you 
wish to select a setting in 
the "Default Settings" 
screen, go to step 3.

2

Click the desired setting.

3

Make a selection for the setting in the 
screen that appears. 

For detailed descriptions of the condition settings, 
see 

"Printer condition settings" (page 24)

.

4

Click [Submit] to save the entered 
information.

When the printer driver is used and the same settings are configured both in the printer driver and in the above 
screens, the settings configured in the printer driver override the settings in the above screens. If a setting is 
available in the printer driver, use the printer driver to configure the setting. 

Note

Summary of Contents for AR M162 - B/W Laser - All-in-One





















































































































































































































































































































































































Reviews:

No comments