manualshive.com logo in svg

Sharp AR M162 - B/W Laser - All-in-One, Operation Manual, Page: 340 / 372

Share
Download
Sharp AR M162 - B/W Laser - All-in-One Operation Manual Download Page 340

14

INSTALLING THE SOFTWARE (THAT ACCOMPANIES THE MACHINE)

INSTALLATION METHOD 4

Use this procedure to install the software in the following environments:

1.The printer is connected by parallel cable.
2.Windows version: Windows 95/Windows 98/Windows Me/Windows NT 4.0*/Windows 2000*

1

Make sure that the parallel cable is not 
connected to the machine and your 
computer before proceeding.

If the cable is connected, a Plug and Play window 
will appear. If this happens, click the [Cancel] 
button to close the window and disconnect the 
cable.

2

Insert the "Software CD-ROM (1)" that 
accompanies the machine into your 
computer's CD-ROM drive.

3

Double-click [My Computer] and then 
double-click the [CD-ROM] icon.

4

Follow steps 4 through 7 in 
"INSTALLATION METHOD 2".

5

If you wish to install the MFP driver, 
click the [MFP Driver (Printer/Scanner)] 
button.

To view information on the software, click the 
[Display Readme] button.

6

Click the [Next] button.

7

Installation of the MFP driver (printer 
driver) begins (if "MFP Driver" was 
selected in Step 5).

Follow the on-screen instructions. If you are using 
Windows 95/NT 4.0, go to step 10.

8

When you are asked how the printer is 
connected, select [Connected to this 
computer] and click the [Next] button.

9

When the interface selection screen 
appears, select [Parallel] and click the 
[Next] button.

* To install this software, you must have administrator's rights.

Note

The cable will be connected in step 17.

Note

Summary of Contents for AR M162 - B/W Laser - All-in-One





















































































































































































































































































































































































Reviews:

No comments