manualshive.com logo in svg

Sharp AR M162 - B/W Laser - All-in-One, Operation Manual, Page: 305 / 372

Share
Download
Sharp AR M162 - B/W Laser - All-in-One Operation Manual Download Page 305

21

4

ABOUT THE WEB PAGES (FOR USERS)

When you access the user Web pages in the machine, the following page will appear in your browser.
A menu frame appears on the left side of the page. When you click an item in the menu, a screen appears in the 
right frame that allows you to configure settings for that item.

(1)

Menu frame

Click a setting in the menu to configure it.

(2)

System Information

Shows the current status of the machine and 
model name.

• Device Status

Shows the current status of the machine, paper 
trays, output trays, toner and other supplies, 
and page counts.
Out of paper and other warnings appear in red.

• Device Configuration

Shows what options are installed.

• Network Status

Shows the network status. Information on 
"General", "TCP/IP", "NetWare", "AppleTalk", 
and "NetBEUI" is shown on the respective 
pages.

(3)

Submit Print Job

A file on a computer can be printed out.

☞

DIRECTLY PRINTING A FILE ON A COMPUTER
(page 22)

(4)

Printer Test Page

The "Printer Settings List", which shows printer 
condition settings and key operator settings, and 
various font lists can be printed.

(5)

Condition Settings

Configure basic printer settings and printer 
language settings.

☞

PRINTER DEFAULT SETTINGS (page 23)

(6)

Admin Mode

To open the Web pages for the administrator, 
click here and then enter the administrator's user 
name and password.

☞

ABOUT THE WEB PAGES (FOR THE 
ADMINISTRATOR) (page 25)

☞

PROTECTING INFORMATION PROGRAMMED IN 
THE WEB PAGE ([PASSWORDS]) (page 26)

(2)

(1)

(3)

(4)

(6)

(5)

Summary of Contents for AR M162 - B/W Laser - All-in-One





















































































































































































































































































































































































Reviews:

No comments