manualshive.com logo in svg

Sharp AR M162 - B/W Laser - All-in-One, Operation Manual, Page: 297 / 372

Share
Download
Sharp AR M162 - B/W Laser - All-in-One Operation Manual Download Page 297

13

PRINTING FROM WINDOWS

1

PRINTING TEXT AND LINES IN BLACK

Color text and lines that are normally printed in light color can be printed in black. Color text and lines that are faint 
when printed normally can be printed in black to improve legibility.

Printing text in black

Text that is any color other than white is printed in black.
To use this function, open the printer driver setup screen and click on the [Text To Black] checkbox in the 
[Advanced] tab.

Printing lines in black

Lines and solids that are any color other than white are printed in black.
To use this function, open the printer driver setup screen and select the [Vector To Black] checkbox in the 
[Advanced] tab.

Print data

Printing result

Text To Black

Text To Black

• When using the PCL6 printer driver, if [Print as graphics] is selected in "TrueType Mode" of [Font] in the 

[Advanced] tab, this function cannot be used.

• When using the PCL5e printer driver, if [Raster] is selected in "Graphics Mode" in the [Advanced] tab, this 

function cannot be used.

Print data

Printing result

Vector To Black

Vector To Black

When using the PCL6 or PCL5e printer driver, if [Raster] is selected in "Graphics Mode" in the [Advanced] tab, 
this function cannot be used.

ABCD
EFGH

ABCD
EFGH

ABCD
EFGH

Note

Note

Summary of Contents for AR M162 - B/W Laser - All-in-One





















































































































































































































































































































































































Reviews:

No comments