manualshive.com logo in svg

Sharp AR M162 - B/W Laser - All-in-One, Operation Manual, Page: 115 / 372

Share
Download
Sharp AR M162 - B/W Laser - All-in-One Operation Manual Download Page 115

22

SCAN

6

Specify a group name, format and 
folder for saving the image, and then 
click the [Next] button.

JPG, BMP, TIF or PNG can be selected for the 
format. To begin scanning, click the [Next] button.

7

When scanning ends, the following 
screen will appear. Select the next 
task you wish to perform and then 
click the [Next] button. 

If you are ready to end the session, click 
[Nothing. I'm finished working with these 
pictures].

8

Click the [Finish] button.

The "Scanner and Camera Wizard" closes and 
the scanned image is saved in the specified 
folder.

Summary of Contents for AR M162 - B/W Laser - All-in-One





















































































































































































































































































































































































Reviews:

No comments