manualshive.com logo in svg

Sharp AR M162 - B/W Laser - All-in-One, Operation Manual, Page: 350 / 372

Share
Download
Sharp AR M162 - B/W Laser - All-in-One Operation Manual Download Page 350

24

INSTALLING THE SOFTWARE

INSTALLING THE PRINTER DRIVER (STANDARD 
INSTALLATION)

1

Insert the network expansion kit 
"Software CD-ROM (1)" into your 
computer's CD-ROM drive.

2

Click the [start] button, click [My 
Computer] (

), and then double-click 

the [CD-ROM] icon (

).

In Windows 95/98/Me/NT 4.0/2000, double-click 
[My Computer] and then double-click the 
[CD-ROM] icon.

3

Double-click the [Setup] icon (

).

4

The "SOFTWARE LICENSE" window 
will appear. Make sure that you 
understand the contents of the license 
agreement and then click the [Yes] 
button.

5

Read the message in the "Welcome" 
window and then click the [Next] 
button.

6

Click the [Printer Driver] button.

To view information on the software, click the 
[Display Readme] button.

• If you wish to install the printer status monitor, 

click the [Printer Status Monitor] button in this 
window and follow the on-screen instructions.

• If you wish to install the printer administration 

utility, click the [Administrator Tools] button in 
this window and then click the [Printer 
Administration Utility] button and follow the 
on-screen instructions.

7

Click the [Next] button.

8

Click the [Standard installation] 
button.

If you wish to install the display font or specify the machine's IP address by direct entry when installing the printer 
driver, select [Custom installation]. (Page 26)

To use the machine as a network printer in Windows NT 4.0, "TCP/IP Protocol" must be installed on your 
computer. If this is not installed, see Windows NT 4.0 Help to install them.

Note

Caution

If the language selection screen appears 
after you double click the [Setup] icon, 
select the language that you wish to use and 
click the [Next] button. (Normally the correct 
language is selected automatically.)

Note

Summary of Contents for AR M162 - B/W Laser - All-in-One





















































































































































































































































































































































































Reviews:

No comments