Home
/
Sharp
/
AR M162 - B/W Laser - All-in-One
/
Operation Manual

Sharp AR M162 - B/W Laser - All-in-One, Operation Manual, Page: 104 / 372

Share

Page: 104 / 372

Sharp AR M162 - B/W Laser - All-in-One Operation Manual Download Page 104

11

2

PRINTER SHARING

This chapter explains how to configure the machine as a shared printer in a Windows network environment.
Configuring the machine as a shared printer enables computers that are not directly connected to the machine to
print to the machine.

SHARING THE PRINTER USING
WINDOWS NETWORKING

The machine can be used as a shared printer in a Windows 95/98/Me/NT 4.0/2000/XP network environment.
Note that the Windows network environment must already be established.

"Print server" as explained here is a computer that is directly connected to the machine, and a "Client" is any other
computer that is connected to the same network.

Shared printer

Client

Client

Client

Print server

☞

CLIENT SETTINGS (page 13)

☞

SHARED PRINTER SETTINGS (page 12)

«
...
102
103
104
105
106
...
»

Summary of Contents for AR M162 - B/W Laser - All-in-One





















































































































































































































































































































































































Reviews:

No comments