manualshive.com logo in svg

Sharp AR M162 - B/W Laser - All-in-One, Operation Manual, Page: 292 / 372

Share
Download
Sharp AR M162 - B/W Laser - All-in-One Operation Manual Download Page 292

8

PRINTING FROM WINDOWS

TWO-SIDED PRINTING (ONLY FOR MODELS THAT 
SUPPORT TWO-SIDED PRINTING)

On models that have the two-sided printing function, both sides of the paper can 
be printed on.
To use this function, open the printer driver setup screen and select [2-Sided 
(Book)] or [2-Sided (Tablet)] from "Document Style" in the [Main] tab.
To open the printer driver, see 

"BASIC PRINTING" (page 3)

.

The following example shows the result when portrait data is printed on both sides of the paper.

• Paper sizes that can be used for two-sided printing are Ledger, Letter, Legal, Foolscap, A3, A4, A5, B4 and 

B5.

• The bypass tray cannot be used for two-sided printing.

Print data

Printing result

2-Sided (Book)

2-Sided (Tablet)

The pages are printed so that 
they can be bound at the side.

The pages are printed so that 
they can be bound at the top.

Note

Summary of Contents for AR M162 - B/W Laser - All-in-One





















































































































































































































































































































































































Reviews:

No comments