Sharp AR M162 - B/W Laser - All-in-One, Operation Manual, Page: 248 / 372

4
SETTINGS AND PROGRAMMING
REQUIRED FOR THE NETWORK
SCANNER FEATURE
To use the Network Scanner feature, settings for the SMTP server, DNS server, and destination addresses must be
configured.
To configure the settings, use a computer that is connected to the same network as the machine to access the
machine's Web server. The Web page can be viewed with your Web browser (Internet Explorer 5.5 or later
(Windows)/5.1 or later (Macintosh), or Netscape Navigator 6.0 or later).
HOW TO ACCESS THE WEB PAGE AND VIEW HELP
Use the following procedure to access the Web pages. [Help] can be clicked at the bottom of the menu frame to view
information on the various function settings that can be operated remotely over the network from the machine's Web
pages. For the settings of each function, see the explanations in Help.
1
Open the Web browser on your
computer.
Supported browsers:
Internet Explorer 5.5 or later (Windows)/
5.1 or later (Macintosh)
Netscape Navigator 6.0 or later
2
In the "Address" field of your Web
browser, enter the IP address of the
machine.
To check the IP address,
see
"CHECKING THE IP
ADDRESS" (page 37) .
When the connection is complete, the Web page will
appear in your Web browser.
☞
ABOUT THE WEB PAGE (FOR USERS) (page 5)
3
Click [Help] under the menu frame.
For an explanation of a
function or setting in the
Web page, click the
corresponding item in the
Help screen.
4
Close the Web page.
When you have finished
using the Web page, click
the (close) button in
the top right corner of the
page.