manualshive.com logo in svg

Sharp AR M162 - B/W Laser - All-in-One, Operation Manual, Page: 370 / 372

Share
Download
Sharp AR M162 - B/W Laser - All-in-One Operation Manual Download Page 370

44

CONNECTING TO A COMPUTER

Connecting a usb cable

Please purchase a USB cable (shielded) that complies 
with the following standard.
The USB interface on the machine complies with the 
USB 2.0*/1.1 standard.

* when the dual function board is installed.

Connecting a parallel cable

Please purchase a Centronics cable (shielded) that 
complies with the following standard.
The parallel port on the machine complies with 
IEEE-STD-1284-1994 ECP.

Connector type (on the machine):
36-pin Amphenol female connector

Connecting to a network connector

If the machine will be used as a network computer, 
read the online manual on the "Network Utilities" 
CD-ROM that accompanies the network expansion kit 
(AR-NB3).
Use a network cable that is shielded.

USB-2:

USB 2.0 port

USB-1:

USB 1.1 port

• The machine's USB 2.0 port will transfer data at the speed specified by the USB 2.0 only if the Microsoft USB 

2.0 driver is preinstalled in the computer, or if the USB 2.0 driver for Windows 2000 Professional/XP that 
Microsoft provides through "Windows Update" is installed.

• To obtain the full USB 2.0 data transfer speed, "USB2.0 mode" in the machine's key operator programs must 

be set to "Hi-Speed". For more information, see the "Key operator's guide".

• Use the machine's "Hi-Speed" mode only when using a computer that is running Windows 2000/XP/Server 

2003.

• Even when the Microsoft USB 2.0 driver is used, it may not be possible to obtain full USB 2.0 speed if a PC 

card supporting USB 2.0 is used. To obtain the latest driver (which may enable a higher speed), contact the 
manufacturer of your PC card.

• The cable can also be inserted into a USB 1.1 port. However, performance will be the same as USB 1.1.

Note

Summary of Contents for AR M162 - B/W Laser - All-in-One





















































































































































































































































































































































































Reviews:

No comments