Sharp AR M162 - B/W Laser - All-in-One Operation Manual Download Page 343

Page: 343 / 372

INSTALLING THE SOFTWARE (THAT ACCOMPANIES THE MACHINE)

Select the network printer that is
shared and click the [OK] button.

In the printer port selection window,
verify the network printer that is
shared and click the [Next] button.

When the model selection window
appears, select model name of your
machine and click the [Next] button.

Follow the on-screen instructions.

Click the [Close] button.

This completes the installation.

Ask your network administrator for the
server name and printer name of the
machine on the network.

If you are using Windows 2000/XP.

If a warning message regarding the
Windows logo test or digital signature
appears, be sure to click the [Continue
Anyway] or [Yes] button.

Note

Caution

Summary of Contents for AR M162 - B/W Laser - All-in-One





















































































































































































































































































































































































Search results

Summary of Contents for AR M162 - B/W Laser - All-in-One

Reviews:

Sharp AR M162 - B/W Laser - All-in-One, Operation Manual, Page: 343 / 372

Search results

Summary of Contents for AR M162 - B/W Laser - All-in-One

Reviews: