manualshive.com logo in svg

Sharp AR M162 - B/W Laser - All-in-One, Operation Manual, Page: 358 / 372

Share
Download
Sharp AR M162 - B/W Laser - All-in-One Operation Manual Download Page 358

32

SETUP IN A MACINTOSH 
ENVIRONMENT

HARDWARE AND SOFTWARE 
REQUIREMENTS

Before installing the PPD file for Macintosh, see "HARDWARE AND SOFTWARE REQUIREMENTS" on page 43 to 
make sure your computer meets the hardware and software requirements.

APPLETALK SETTINGS

After connecting the machine to the network, configure AppleTalk settings as required for your network environment.
To configure the settings, see the online manual on the "Network Utilities" CD-ROM.

INSTALLING THE PPD FILE

In order to print from a Macintosh, the PPD file must be installed. Follow the steps below to install the PPD file.

INSTALLATION IN MAC OS X

1

Insert the network expansion kit 
"Software CD-ROM (1)" into your 
computer's CD-ROM drive.

2

Double-click the [CD-ROM] icon (

) 

on the desktop.

3

Double-click the [MacOSX] folder.

4

Double-click the folder of the 
operating system version you are 
using.

• In Mac OS X v10.1.5, double-click the [Version 

10.1] folder.

• In Mac OS X v10.2 to 10.2.8 (excluding 10.2.2), 

double-click the [Version 10.2] folder.

• In Mac OS X v10.3 to 10.3.4, double-click the 

[Version 10.3] folder.

5

Double-click the [AR-NB3-1] icon (

).

Operating system

Mac OS 8.6 to 9.2.2, 10.1.5 and 10.2 to 10.2.8 (excluding 10.2.2), 10.3 to 
10.3.4

CPU and RAM

The requirements of the operating system must be satisfied.

• If the "Authenticate" window appears, 

enter the password and click the [OK] 
button.

• If you are using Mac OS X v10.1.5, click 

the lock icon (

), enter the password, 

and click the [OK] button.

Note

Summary of Contents for AR M162 - B/W Laser - All-in-One





















































































































































































































































































































































































Reviews:

No comments