manualshive.com logo in svg

Sharp AR M162 - B/W Laser - All-in-One, Operation Manual, Page: 360 / 372

Share
Download
Sharp AR M162 - B/W Laser - All-in-One Operation Manual Download Page 360

34

SETUP IN A MACINTOSH ENVIRONMENT

INSTALLATION IN MAC OS 8.6 TO 9.2.2

1

Insert the network expansion kit 
"Software CD-ROM (1)" into your 
computer's CD-ROM drive.

2

Double-click the [CD-ROM] icon (

) 

on the desktop.

3

Double-click the [MacOS] folder.

4

Double-click the [Installer] icon (

).

The installer window will appear.

5

Click the [Install] button.

6

The License Agreement window will 
appear. Make sure that you 
understand the contents of the license 
agreement and then click the [Yes] 
button.

7

Read the message in the window that 
appears and click the [Continue] 
button.

Installation of the PPD file begins.
After the installation, a message prompting you to 
restart your computer will appear. Click the [OK] 
button and restart your computer.

This completes the installation of the software.

INSTALLING THE SCREEN FONTS (MAC OS 8.6 - 9.2.2)

Macintosh screen fonts are contained in the [Font] folder of the "PRINTER UTILITIES" CD-ROM that accompanies 
the PS3 expansion kit (AR-PK1/N). The screen fonts are installed by copying the required screen font suitcase 
folders to your Macintosh.
Copy the screen fonts to the following folder:

• Mac OS 8.6 to 9.2.2: [Fonts] folder in the [System Folder]

If you are using Mac OS 8.6 to 9.2.2, make sure that "LaserWriter8" has been installed and that the 
"LaserWriter8" checkbox is selected (

) in "Extensions Manager" in "Control Panels". If not, install it from the 

system CD-ROM supplied with your Macintosh computer.

If you experience problems that may be due to the installed screen fonts, immediately delete the copied font 
suitcase folder from the system.

Note

Note

Summary of Contents for AR M162 - B/W Laser - All-in-One





















































































































































































































































































































































































Reviews:

No comments