manualshive.com logo in svg

Sharp AR M162 - B/W Laser - All-in-One, Operation Manual, Page: 35 / 372

Share
Download
Sharp AR M162 - B/W Laser - All-in-One Operation Manual Download Page 35

33

TROUBLESHOOTING AND MAINTENANCE

2

Misfeed in C

1

Lower (1) in the illustration, open the 
fusing unit paper guide, and remove 
the misfed paper.

Be careful not to tear the misfed 
paper during removal.

2

If the misfed paper cannot be removed 
by the previous step, remove it from 
the paper output area.

Be careful not to tear the misfed 
paper during removal.

3

Close the side cover.

The message "

Clear paper 

path." will be cleared and 
copying will be possible.

MISFEED IN TRAY 1

1

Pull out tray 1 and remove the misfed 
paper.

Be careful not to tear the misfed 
paper during removal.

2

Open and close the side cover.

The message "

Clear paper 

path." will be cleared and 
copying will be possible.

3

Gently push tray 1 into the machine.

Push the tray in completely.

The fusing unit is hot. Do not touch 
the fusing unit when removing 
misfed paper. Doing so may cause a 
burn or injury.

(1)

Warning

• When closing the side cover, hold the 

handle.

• If the paper was torn, make sure that no 

torn pieces remain in the machine.

• If the message does not clear, check 

again to make sure that no pieces of 
paper remain.

Note

Make sure that there is no misfed paper in the tray before pulling it out. (Page 31)

Note

• When closing the side cover, hold the 

handle.

• If the message does not clear, check 

again to make sure that no pieces of 
paper remain.

Note

Summary of Contents for AR M162 - B/W Laser - All-in-One





















































































































































































































































































































































































Reviews:

No comments