Sharp AR M162 - B/W Laser - All-in-One, Operation Manual, Page: 263 / 372

19
HOW TO USE THE NETWORK SCANNER FUNCTION
2
AUDITING MODE
Auditing mode is used to restrict the use of scan mode to valid accounts (up to 50 accounts can be created) and to
keep a count of pages transmitted by each account.
Using audit mode
When auditing mode is enabled, the account number entry screen is displayed. Enter your account number
(five-digit identification number) as explained below before performing a scanner operation.
1
Enter your account number (five
digits) with the numeric keys.
• As the account number is entered, the hyphens (-)
change to asterisks ( ). If you enter an incorrect
digit, press [C] key and re-enter the correct digit.
• After you enter your account number, the base
screen of scan mode ( page 18 ) appears.
2
When you have finished using scan
mode, press the [ACC.#-C] key ( ).
Enter your account
number.
ACCOUNT #:
-----
• If you enter an account number for copy
mode has also been programmed for
scan mode, you can change to scan mode
after completing the copy operation and
continue with the scan operation without
re-entering your account number.
If you enter an account number for copy
mode that has not been programmed for
scan mode, enter your account number
for scan mode after you press the [SCAN]
key to change to scan mode.
• When "ACC. # SECURITY" is enabled in
the key operator programs (see the "Key
operator's guide"), the message "Please
see your key operator for assistance" will
appear for one minute if an invalid
account number is entered three times in
a row. During that time operation of the
machine will not be possible.
ABC DEF
JKL GHI MNO
TUV PQRS WXYZ
@.-_
FUNCTION
ACC. #-C READ-END
OK
Enter your account
number.
ACCOUNT #:
---
Note
@.-_
FUNCTION
ACC. #-C READ-E