Sharp AR M162 - B/W Laser - All-in-One, Operation Manual, Page: 312 / 372

28
WEB FUNCTIONS OF THE MACHINE
KEY OPERATOR PROGRAMS
The key operator programs are used to prohibit changes to the [Condition Settings] and to configure interface settings.
• Default settings : Select the setting for which you wish to prohibit changes.
• Interface settings : Enable monitoring of data sent to the network port and set restrictions.
Configuring a setting in the key operator programs
1
Click [Key operator programs] in the
menu frame.
The "Default Settings"
screen of the [Key
operator programs] will
appear. If you wish to
select a setting in the
"Default Settings" screen,
go to step 3.
2
Click the desired setting.
3
Make a selection for the setting in the
screen that appears.
See "Key operator programs" for descriptions of
the settings.
4
Click [Submit] to store the entered
information.
Key operator programs
When "YES, NO" appears in the "Settings" column, "YES" is selected when a checkmark appears in the checkbox of
the item, and "NO" is selected when checkmark does not appear.
Default settings
Interface settings
Item Settings Description
Prohibit Test Page Printing YES, NO This setting is used to prohibit printing of a printer test page.
Disable Default Setting
Changes YES, NO This setting is used to prohibit changes to the default
condition settings.
Disabling of Clock
Adjustment YES, NO This setting is used to prohibit changes to the date and time
settings. This item does not appear when the fax option is installed.
Item Settings Description
Hexadecimal Dump
Mode YES, NO This program is used to print out the print data from the
computer in hexadecimal and in the corresponding text
characters (based on ASCII code). This allows you to
check whether or not print data is being correctly sent from
the computer.
I/O Timeout 1- 60 - 999 (sec) During reception of a print job, if remaining data is not
received after the time set here elapses, the port
connection is broken and the next print job is begun.
Emulation Switching Auto* , PostScript*, PCL Select the printer language. When [Auto] is selected, the
language is automatically selected from the data sent to
the printer. Unless errors occur frequently, do not change
the setting from [Auto] to another setting.
*Only when the PS3 expansion kit is installed.
Port Switching Method Switch at End of Job ,
Switch after I/O Timeout
Select the method for switching network ports.