Sharp AR M162 - B/W Laser - All-in-One, Operation Manual, Page: 364 / 372

38
SETUP IN A MACINTOSH ENVIRONMENT
MAC OS 8.6 TO 9.2.2
1
Select [Chooser] from the Apple
Menu.
2
Click the [LaserWriter 8] icon.
• The model name of your network-connected
machine ([SCxxxxxx]) appears in the "Select a
PostScript Printer" list on the right.
The name of the machine that appears is the
name that was entered in the AppleTalk
settings when the network settings were
configured. Unless the name was changed
when configuring the settings, it will be
[SCxxxxxx] ("xxxxxx" is a sequence of
characters that varies depending on your
machine).
• If multiple AppleTalk zones are displayed,
select the zone which includes the printer.
3
Click the machine's model name
([SCxxxxxx]) in the "Select a
PostScript Printer" list.
4
Click the [Create] button.
• If the "Select a PostScript Printer Description
File" dialog box appears, select the PPD file of
your model and then click the [Select] button.
• If the "Select a PostScript Printer Description
File" dialog box does not appear, follow these
steps to select the PPD file manually when you
return to the "Chooser" dialog box.
(1) Verify that the machine is selected in the
"Select a PostScript Printer" list, and then
click the [Setup] button and the [Select PPD]
button.
(2) Select the PPD file of your model, and then
click the [Open] (or [Select]) button.
(3) Click the [OK] button.
5
Verify that the machine is selected in
the "Select a PostScript Printer" list,
and then click the [Setup] button and
the [Configure] button.
6
Configure the printer driver based on
the options that have been installed
and then click the [OK] button.
7
Click the [OK] button to close the
dialog box.
8
Click the Close box ( ) to close the
"Chooser".
This completes the configuration of the printer
driver.