Sharp AR M162 - B/W Laser - All-in-One Operation Manual Download Page 40 | Manualshive

Page: 40 / 372

Sharp AR M162 - B/W Laser - All-in-One Operation Manual Download Page 40

38

TROUBLESHOOTING AND MAINTENANCE

CLEANING THE TRANSFER CHARGER

If white or black lines appear in copies or the image is blotchy, the transfer charger may be dirty. Follow the steps
below to clean the charger.

1

Turn the power switch off.

2

Open the bypass tray and the side
cover.

3

While lifting the handle, gently pull out
tray 1.

4

Take out the charger cleaner.

5

Place the charger cleaner on the
transfer charger and gently slide the
cleaner in the direction indicated by
the arrow two or three times.

If the sheet metal on the
transfer charger is smudged
with toner, wipe it with a soft,
clean cloth.

6

Return the charger cleaner to its
original position.

7

Close the tray and side cover.

8

Turn the power switch to the "ON"
position.

Charger
cleaner

Slide the charger cleaner from one end to
the other end along the groove of the
transfer charger. If the cleaner is stopped it
reaches the other end or if the direction of
movement is reversed, smudges may
appear on copies.

Note

Charger
cleaner

«
...
38
39
40
41
42
...
»

Summary of Contents for AR M162 - B/W Laser - All-in-One





















































































































































































































































































































































































Reviews:

No comments