SerVision
Embedded Video Gateway System Guide
Configuring Sensor and Activator Settings
145
2. Select
Cancel GEOF/PERIM
. The geo-fence sensor is disabled, and a confirmation message appears.
3. Click
OK
. The message closes.
4. Modify the settings as required.
Note:
Follow the instructions above to upload new polygon files (see p. 133), create a new itinerary (see
p. 136), activate a different geo-fence (see p. 137), or define a new perimeter limit (see p. 139.).
5. When you have finished, click
Exit
to close the
Remote Route Selection
utility.
Erasing Geo-Fences from the Unit
If you no longer need to use route, area, or itinerary files that are stored on the Video Gateway, you can erase them.
You can erase individual files one at a time or all of the files at one time.
To erase an individual route, area, or itinerary file from the Video Gateway:
1. In the
Remote Route Selection
utility, in the upper left of the window, click
Query files on unit
. The list of
geo-fencing files is refreshed.
2. Click the
Files
field. The list of geo-fencing files is displayed (see figure 158).
3. Select the item you want to erase, and then select
Erase
. The item is erased, and a confirmation message
appears.
Figure 169: Erasure confirmation message
To erase all the route, area, and itinerary files from the Video Gateway:
1. In the
Remote Route Selection
utility, in the upper left of the window, click
Query files on unit
. The list of
geo-fencing files is refreshed.
2. Select
Erase all files
. The items are erased, and a confirmation message appears.
Figure 170: Erasure confirmation message
Configuring a Speed-Limit Sensor
The Speed-Limit sensor triggers an event if the speed of the vehicle exceeds the rate you specify.
To configure the Speed-Limit sensor:
1. In the
Main Menu
, under
Sensors
, click
Speed Limit
. The
Speed Limit Alert
configuration screen opens.