SerVision MVG200, Configuration And Management Manual, Page: 57 / 241

SerVision Embedded Video Gateway System Guide
Configuring System Settings 56
NOTE:
Be sure to assign a static internal IP to the device before you set up port forwarding to it (see Appendix
C: Networks Managed by SerVision Routers , page 238)


 To configure port forwarding for a device connected to the unit's router:
1. In the
Main Menu
, under System , click Port Forwarding . The
Port Forwarding
screen opens and displays
a list of the ports that are already open for remote access and the internal IPs of the devices to which they
provide access.
Note: The system and configuration ports of the unit in the router’s network (see Ports , page 17) are defined
automatically by the router and cannot be modified.
Figure 53: Port Forwarding screen
2. In the next available row in the table, fill in the fields as follows:
Field Description
Port The number of the port to assign to the device. You can choose any number in the range
1–65535 that is not already in use.
IP The internal IP of the device
Figure 54: Adding a port
3. Click Update and then save the settings. They will be implemented after the unit is restarted (see Saving
Configuration Changes , page 156).