SerVision MVG200, Configuration And Management Manual, Page: 109 / 241

SerVision Embedded Video Gateway System Guide
Configuring Camera Settings 108
Figure 111: (WP) indicating linear recording (Write Protection) is selected
CAUTION:
When you update a recorder's disk allocation or size settings, all the recorded video that is currently
stored on the storage media is deleted.
NOTE:
TV-Out makes use of the same system resources as the unit’s video recorder. As a result, the global
framerate available for recording is reduced somewhat when TV-Out is enabled. For additional
information, see
Configuring a CCTV Monitor (TV-Out) , page 25.


 To set advanced recorder settings for a camera:
1. In the bottom of the
Camera
configuration screen, under Recorder , select Enable Advanced Settings . The
fields required to configure advanced settings are displayed along with the other recorder settings above the
checkbox:
Figure 112: Advanced recorder settings
2. To modify the disk allocation for this recording stream, under Size on Disk , specify the proportion of the disk
space to allocate for the stream, as a percent value.
(WP)