SerVision MVG200 Configuration And Management Manual Download Page 32 | Manualshive

Page: 32 / 241

SerVision MVG200 Configuration And Management Manual Download Page 32

SerVision

Embedded Video Gateway System Guide

Configuring System Settings

31

streams to clients. When this occurs, playing of video in the CCTV monitor is temporarily suspended. It resumes
automatically when the resources are once again available.

NOTE:

For additional information about this option, please contact SerVision technical support.







To configure the CCTV monitor to play video from the Video Gateway:

1. In the

TV-Out Settings

screen, under

Display Mode

, select

Content

. The fields required to configure the

monitor to play the prerecorded video are added to the screen:

Figure 24: TV-Out settings for Content playback (MVG)

2. Under

Disk Allocation for Content

, select how many GBs of storage space to allocate to the prerecorded

video you want to play back in the CCTV monitor.

3. Click

Update

. A warning message appears, reminding you that this feature may take resources away from

other system functions.

«
...
30
31
32
33
34
...
»

Summary of Contents for MVG200


















































































































































































































































Reviews:

No comments