SerVision
Embedded Video Gateway System Guide
Configuring System Settings
60
4. If you are using either the
No-IP
or the
DynDNS
DDNS service, fill in the
Username
and
Password
fields.
The username and password should have been supplied to you by
No-IP
or
DynDNS
when you set up your
account there. Under
Confirm Password
, type the password a second time to ensure you typed it correctly.
Note:
SerVision cannot provide support for problems related to the
No-IP
or
DynDNS
DDNS services. For
technical support, please contact the service providers.
5. If you are using the
SV-DDNS
service and you want to change the address of the DDNS server, select
Advanced
. The fields required to specify the server are added to the screen.
Figure 58: Advanced SV-DDNS settings
Fill in the fields as follows:
Field
Description
DDNS Server
Fill in the IP address or hostname of the SV-DDNS server.
DDNS Port
Fill in the access port of the SV-DDNS server.
6. Click
Update
, and then save the settings. They will be implemented after the unit is restarted (see
Authentication
Access to the system is controlled by username-password authentication. You can create up to ten users. For each
user, you can define a specific combination of system permissions. Users can be assigned any or all of the following
permissions:
Permission
Description
Live Video
The user can connect to the unit through a client application and view live video.
Recorded Video
The user can connect to the unit through a client application and view recorded video.
Camera Control
The user can connect to the unit through a client application and control cameras using their
PTZ controllers.
Note:
The Live Video permission must also be selected in order for the user to make use of
this feature.
Configuration
The user has full access to the unit’s configuration utility and can modify the configuration
settings.
By default, two users are defined:
A user with permissions for all of the system’s features. The default username for this user is
svuser
and the
password is
servconf
.