SerVision
Embedded Video Gateway System Guide
System Diagnostics
182
The unit can be configured to periodically perform a routine maintenance procedure. The procedure helps ensure
the unit will function optimally over long periods of time. During the maintenance procedure, the system is
temporarily unavailable. The procedure takes up to three minutes.
In addition, the unit can be configured to wait a specified period of time after startup before attempting to connect to
the local network. This option is useful in network configurations in which it is desirable to allow time for the local
network to get up and running after a power outage or other interruption in network communication before the
Video Gateway attempts to connect to the network.
To configure the maintenance options:
1. In the
System Diagnostics
screen, click
Maintenance
. The
Maintenance
screen opens.
Figure 218: Maintenance screen (HVG400, CVG, CVG-M)
2. Under
Scheduled maintenance at
, select the time at which you want the maintenance procedure to run.
3. In the text field between
Every
and
Days
, fill in how often you want the maintenance procedure to take place,
in days. If you do not want the maintenance procedure to run at all, type “0.”
4. Under
Network Startup Delay
, specify in the number of seconds the unit should wait after it boots up before
it attempts to connect to the network.
5. Click
Update
, and then save the settings. They will be implemented after the unit is restarted (see