SerVision MVG200, Configuration And Management Manual, Page: 102 / 241

SerVision Embedded Video Gateway System Guide
Configuring Camera Settings 101
9. Under Maximum Event Length , specify the maximum length of a VMD event, in seconds. Range: 60–86400
seconds (1 minute – 1 day). If motion is detected continuously for longer than this period of time, a new event
is automatically generated at the end of this interval.
10. Under On Motion Detected , select the actions that the Video Gateway should perform if motion is detected,
as follows:
Field Description
AVV Select this option to have the Video Gateway send video of the event to an AVV server for
downloading. The video is uploaded to the site defined in the
AVV screen, in the format
defined there (see Automatically Uploading Video to an AVV Server , page 67), and e-mail
notifications are sent to all e-mail recipients (see
SMS and E-mail Notifications
, page 61).
Note: The upload of the video clip begins at the
end
of the motion event. Nevertheless,
the first e-mail notification is sent when the event is first detected. Thus, the video clip
may not be available yet when you receive this e-mail notification. A second e-mail
notification is sent when uploading is completed.
Note: This feature only works if recording (either event-triggered or continuous) is
activated for the camera (see
Video Recording Settings
, page 104).
Note: This option only appears if AVV is activated for the Video Gateway (see
Automatically Uploading Video to an AVV Server
, page 67).
FTP Select this option to have the Video Gateway send snapshots of the event to an FTP
server.
Note: This option only appears if FTP is enabled for the Video Gateway (see
FTP Server
Settings
, page 74).
SMS Select this option to have the Video Gateway send SMS notifications when a motion event
is detected. Messages are sent to the recipients specified in the
SMS and E-mail screen,
in the format defined there (see SMS and E-mail Notifications , page 61).
E-mail Select the desired type of e-mail notification, as follows:
 None: Do not send e-mail notifications when a motion event is
detected.
 Text only: When a motion event is detected, send e-mail notifications.
Include a text message in the e-mail, but do not attach any images to
the message.
 Text & image: When a motion event is detected, send e-mail
notifications that include both a text message and a picture of the first
frame of the event.
Note: E-mail messages are sent to the recipients specified in the SMS and E-mail
screen, in the format defined there (see
SMS and E-mail Notifications
, page 61).
Note: If AVV is selected, Text & image is automatically selected for this field, and
cannot be disabled. A single e-mail containing both the standard notification text and the
AVV notification is sent at the beginning of each event. In addition, a text-only e-mail is
sent when the file transfer is completed.
Note: If AVV was once selected, and has since been cleared, Text & image remains
selected for this field until the selection is changed manually. If it is not changed, AVV is
not activated, but notifications with snapshots are sent at the beginning of each event.