iris is at the max. System does not add the auto iris function in the exposure contr ol. This function is
on by default.
Gamma: It is to set each pixel brightness. The higher the value is, the brighter the image is. The
value ranges from 0 to 100. The recommended value ranges from 40 to 60.
Mirror: It is to switch video left and right limit. This function is disabled by default.
Flip: Please select from the dropdown list. It includes normal/180°/90°/270° and etc. Some camera
sports flip mode.
3D NR: It is to process multiple-frame (At least two frames). System uses the information between
these two frames to realize noise reduction function.
BLC: It includes several options: BLC/WDR/HLC/OFF.
BLC: There are two modes: default/customize. For the default mode, the device auto exposures
according to the environments situation so that the darkest area of the video is clearer. For the
customized mode, you can select a rectangle zone to enhance its brightness to the proper level.
WDR: For the WDR scene, this function can lower the high bright section and enhance the
brightness of the low bright section. So that you can view these two sections clearly at the same time.
The value ranges from 1 to 100. When you switch the camera from no-WDR mode to the WDR mode,
system may lose several seconds record video.
HLC: After you enabled HLC function, the device can lower the brightness of the brightest section
according to the HLC control level. It can reduce the area of the halo and lower the brightness of the
whole video.
OFF: It is to disable the BLC function. Please note this function is disabled by de fault.
Profile: It is to set the white balance mode. It has effect on the general hue of the video. This function
is on by default. You can select the different scene mode such as auto, sunny, cloudy, home, office,
night, disable and etc to adjust the video to the best quality.
Auto: The auto white balance is on. System can auto compensate the color temperature to make
sure the vide color is proper.
Sunny: The threshold of the white balance is in the sunny mode.
Night: The threshold of the white balance is in the night mode.
Customized: You can set the gain of the red/blue channel. The value reneges from 0 to 100.
W/B Mode: It is to set white balance mode. It can affect the video total hue. The default setup is auto.
Please note different cameras support different modes. Please select from the dropdown list. The
options include sunny/night/customized and etc.
Day/night. It is to set device color and the B/W mode switch. The default setup is auto.
Color: Device outputs the color video.
Auto: Device auto select to output the color or the B/W video according to the device feature (The
general bright of the video or there is IR light or not.)
B/W: The device outputs the black and white video.
Sensor: It is to set when there is peripheral connected IR light.
Please note some non-IR series
product support sensor input function.
Summary of Contents for ELITE Network IP Series
