Satelec Implant Center 2, User Manual

Page: 10 / 248

Safety devices
Thermal safety shut off to avoid overheating of the I-
S
URGE
L
ED
micro-motor
Safety shut off if internal malfunction
2 fuses (power cord receptacle): 5 mm x 20 mm - 2
AT for 100 VAC to 230 VAC
1 internal fuse not accessible to the user reference
F1: 5 mm x 20 mm – 10 AT / 250 VAC
Overall dimensions
Control unit :
Width: 472.9 mm
Height: 149.5 mm
Height with bracket: 471.1 mm
Depth: 339.9 mm
Weight: 5 kg without accessories
Footswitch
:
Width: 311 mm
Depth: 209 mm
Height: 181 mm
Weight: approximately 3.5 kg
LCD screen :
Height: 86 mm
Width: 115 mm
Micro-motor cord : 2 000 mm
Scaler handpiece cord : 2 000 mm
P
IEZOTOME
handpiece cord : 2 000 mm
I-S
URGE
L
ED
micro-motor :
Length: 93.1mm
Diameter: 23.2mm
Weight: 119g (without cord)
Coupling type: according to standard ISO 3964
Temperatures
Operation: +10°C to +40°C
Storage: -20°C to +70°C
Humidity
Operation: 30% to 75%
Storage: 10% to 100% including condensation
Atmospheric pressure
Between 500 hPa and 1060 hPa
Measuring units displayed and meaning
Ncm = torque (N.cm)
Rpm = speed (r/min.)
IV - INSTALLATION / FIRST
USE
4. 1 UNPACKING THE DEVICE
Upon receipt of the device, check for any damage
caused in transit.
Contact your supplier if necessary.
4. 2 RECOMMENDATIONS
Have your I
MPLANT
C
ENTER
2 connected to the power
electricity supply by a certified dental installation
technician.
The electrical connection of the I
MPLANT
C
ENTER
2 must
comply with the applicable standards in your country.
Warning:
To avoid any risk of electric shock, this device must
be connected to an electrical power supply with a
protective ground.
4. 3 INSTALLATION
Important:
Do not place the I
MPLANT
C
ENTER
2 close to or on top
of another device.
Do not place the power cord and the footswitch
cord in a wire cover or in a cable gland.
- Place the control unit in position on a fixed surface,
horizontal or with a slope of no more than 5°.
- Check that the power switch (Fig. 2-5) is in position
O (OFF).
10