Satelec Implant Center 2, User Manual

Page: 24 / 248

24
Fault Possible cause Remedy
Inadequate spray Incorrect irrigation flow rate adjustment. Adjust the irrigation flow rate.
Micro-motor does not
operate
Faulty micro-motor cord connector electrical
contacts. Clean the electrical contacts of the micro-
motor cord connectors.
Faulty micro-motor electrical contacts.
Clean the electrical contacts of the micro-
motor.
Micro-motor cord wires cut.
Return to SATELEC after-sales to replace the
cord.
Motor damaged.
Return to SATELEC after-sales to replace the
motor.
Power fault
weak tip vibration
Tip worn or distorted. Replace the tip.
Incorrect power adjustment.
Refer to the T
IPBOOK
and to the clinical booklet
for the necessary information.
Incorrect use: incorrect angle of attack or
inadequate pressure on the tooth. Refer to the T
IPBOOK
and to the clinical booklet
for the necessary information.
Liquid or moisture present between
handpiece and cord.
Dry the electrical contacts thoroughly.
No ultrasonic function
Incorrect tip tightening. Retighten the tip with the wrench.
Faulty connector contact. Clean the connector contacts.
Handpiece cord wire cut.
Return to SATELEC after-sales to replace the
cord.
No light
Handpiece light ring absent. Install the light ring.
Faulty light ring. Replace the light ring.
Faulty light ring connector contacts. Clean the light ring connector contacts.
Light ring the wrong way around.
Position the light ring according to the
foolproofing stud.
Faulty handpiece and/or cord connector
contacts. Clean the handpiece and/or cord connector
contacts.
Other. Contact your installer-fitter.
Leak between the N
EWTRON
L
ED
handpiece and the
handpiece cord
Worn handpiece 1.15x1 seal Replace the seal (kit F12304).
Liquid leak in the irrigation
pump
Broken tube in the irrigation line cassette. Replace the irrigation line.