7. INITIAL COMMUNICATION DATA SETTINGS
IMR02E20-E1
31
7.2 Other Communication Data Settings
Set communication data (PID constants and event set values of the Z-TIO module, DO manual output of
the Z-DIO module, etc.) other than the items set in
7.1 PROFINET Communication Settings (P. 27)
using host communication or loader communication.
Host communication or loader communication is used for “PROFINET Communication
Settings,” and thus if “Other Communication Data Settings” are configured immediately
after these settings, the items can be set without changing the communication method.
For each of the communication setting items, refer to
8. COMMUNICATION DATA LIST
(P. 34)
.
7.3 IP Address Setting
IP address is automatically assigned by the Engineering software.
To set a desired IP address, the Engineering software needs to be used.
