IMR02E20-E1
21
5. HOST COMMUNICATION SETTING
5.1 Address Setting
Set host communication address of COM-ML (SRZ unit).
Set an address for the COM-ML (SRZ unit) using a small blade screwdriver.
Set the address such that it is different to the other addresses on the same line.
Otherwise, problems or malfunction may result.
Host communication
address setting switch
Setting range
:
0 to F
[0 to 15: Decimal number]
Factory set value
:
0
COM-ML
To prevent electric shock or instrument failure, always turn off the power
before setting the switch.
To prevent electric shock or instrument failure, never touch any section other
than those instructed in this manual.
