3. MOUNTING
IMR02E20-E1
10
Module joining procedures
1.
Mount the function modules on the DIN rail. Slide the modules until the modules are closely
joined together and the joint connectors are securely connected.
(Front view of module mainframe)
Joint connector
Function module
COM-ML
2.
Push in the mounting brackets to lock the modules
together and fix to the DIN rail.
After module joining, install a
plastic
cover on the
connector on both sides of the mounted modules
for protection of connectors. (Refer to
P. 8
)
To firmly fix the modules, use end plates (DEP-01)
sold separately on both sides of the mounted
modules.
Removing procedures
1.
Turn the power OFF.
2.
Remove the wiring.
3.
Pull down a mounting bracket with a
slotted screwdriver (A). Lift the
module from bottom, and take it off
(B).
(
Rear view of base
)
Push in all of the mounting brackets.
Mounting
bracket
State where each
module is locked.
(A) Pull down
(B) Lift and take off
